- ATX Motherboard For EPYC 7702 - Supermicro H11 Or H12?
- Install Solaris 11.4 Vmware
- Solaris 10 Install Package
Back in the late 80s and through the 90s, Unix workstations were super powerful, super cool, and super expensive. If you were making 3D graphics or developing applications, you wanted a high-performance workstation and Sun made some of the best ones. But unless you worked for a huge company, university, or government, they were probably too expensive.
Installing and Booting Oracle Solaris 11 From Devices Connected to a USB Port. To install Oracle Solaris without using an IPS AutoInstall server on the network, you can use Oracle Solaris media in a DVD drive. The DVD drive can be built into the server or attached to a USB port. You also can boot from an ISO image copied to a DVD disk, hard drive, or SSD. This is when the install is on the Solaris machine; In order to use the USB stick as a boot media, you will need to have the OpenBoot version higher than 4.27 (when you get to the ok prompt you see the banner that tells you your Open Boot version).
Jun 28, 2009 The steps to install Solaris 10 x86 on an external USB HD go something like this: Power up the external USB HD and make sure it is connected to one of the USB ports on your system. Pop in the Solaris 10 x86 installation media and (re)boot the system. Proceed through the Solaris 10 installation screens/options as needed. Sep 24, 2008 Hi All, I have a problem with my Solaris 10 1-06 installation. I did install it on my external usb hard drive with no problem. But when I try to boot from there I get this scenario: 1.- I can browse trough Grub Menu, everything is OK. 2.- I can boot in failsafe mode. 3.- When i try to boot normal then kernel /platform/i86pc/multiboot load is OK. Sep 06, 2008 Installing Solaris from a USB Disk. Set up an 8GB 'Solaris2' partition on the USB drive using fdisk. Make it the active partition. Set up a UFS slice using all but the first cylinder of that 8GB as slice 0 using format. The first cylinder ends up being. Mount the DVD ISO using.
More than twenty years later, we have much more powerful and affordable computers, so let's emulate the old systems and see what it was like to run some of the coolest computers you could buy in the 90s.
Cinema 4d studio mac. Sun workstations started out running SunOS, based on BSD Unix (like NeXTSTEP), but in 1991 they replaced it with Solaris, based on Unix System V Release 4 (like AIX and HP-UX).
The first version of Solaris was actually Solaris 2, and to try and make sense they went back and named SunOS Solaris 1, but in the operating system it still refers to itself as SunOS. So Solaris 1 is SunOS 4, and Solaris 2 is SunOS 5, and Solaris 2.6 that we'll run is SunOS 5.6. Confused yet?
Ignore the naming conventions and just know that we'll run Solaris 2.6 from 1997. For comparison, at that time a PC would be running Windows 95 and Apple released Mac OS 8 the same year.
You'll need:
- The latest version of QEMU, for this guide version 3.1.0 worked well.
- A system to run it on - Windows, Linux, or Mac
- For added fun, a Sun Type 5 keyboard converted to USB with Drakware's Sun2USB or DIY with the SPARC keyboard specification and a small Arduino like the Trinket M0
Rather than using a virtual machine to run the x86 version of Solaris, we'll use QEMU to emulate the actual SPARC hardware used by Sun machines back in the 90s. SPARC stands for Scalable Processor Architecture and is a RISC (reduced instruction set computing) design.
For Windows, you can download the latest binary from the QEMU site. I used the 20190218 build.
For macOS you can use homebrew to install it:
Download:file
If you're running Linux, your distribution might have an older version of QEMU so you'll need to get the source and compile it. That goes a bit beyond this guide so take a look at the download page for more info.
The disk format that QEMU uses is called qcow2. We'll make a 9.1GB disk, that's plenty to hold Solaris and have a lot of room left over.
Download:file
Disks in Solaris need to be labelled before they can be used, so we can't install just yet. First we need to boot into Solaris to format and label the disk we just made.
Download:file
Let's take a look at the options:
qemu-system-sparc - run the emulator for a 32-bit SPARC system
-M SS-5 - emulate a SPARCstation 5
-m 128 - 128 MB of RAM
-drive file=sparc.qcow2,bus=0,unit=0,media=disk - Use our disk image, put it on SCSI bus 0, unit 0
-drive file=solaris_2.6_598_sparc.iso,bus=0,unit=2,media=cdrom,readonly=on - Use the Solaris 2.6 ISO as a CD drive, SCSI bus 0, unit 2
Once you run that, the OpenBIOS ROM should start first and bring you to a prompt, type:
Download:file
The system should boot into single user mode and bring you to a root prompt (#). First we run a few commands to prep the system, then we'll format the disk.
Download:file
Solaris only knows about a few specific disk types, so we need to specify our own geometry. Fire pro wrestling returns download.
Download:file
Download:file
All set. Now type q to quit the format utility and type reboot to restart the system. It's time to install!
The reboot should take you back to OpenBIOS. Boot from the CD again but this time into the installer:
Download:file
Time to install! For the most part, the defaults are fine, but there are a few places where you'll want to make changes.
When you reach the networking options, pick a hostname and check Yes for Networked. Use 10.0.2.15 for the IP address, QEMU has its own internal network.
Name service: Other
Part of a subnet: No
Now set the time zone, time, and date. When you get to 'Allocate Client Services' just click Continue. Pick an additional language if you'd like one.
Choose how much you want to install. End User is enough to run it, Developer will let you build things, and Entire Distribution will just install everything. If you really want to, you can Customize the installation but it's easy to break things so it's best to stick with the available software groups.
It should auto-select the available disk for you but if not you can select it and click the right arrow to add it to the selected disks.
When it asks about preserving data you can click continue. Click Auto Layout and continue, the defaults are fine. Click continue on the remote file systems page.
Now you can review the last few options. If it looks good click Begin Installation.
Make sure you choose Manual Reboot when prompted - we need to change some settings or else it won't boot.
Once everything is finished you should see 'The finish script log `finish log` is located in /var/sadm/system/logs after reboot.' followed by a root prompt (#).
Now that the installation has finished we need to adjust a few settings to make everything work, we'll use the console to do it. Below, ^D means push Ctrl+D.
First we'll set the SCSI flags so it'll boot properly.
Download:file
Next we need some network settings. Let's add a default router, the address that QEMU uses is 10.0.2.2.
Download:file
Now configure DNS. The nameserver is 10.0.2.3.
By default, Solaris doesn't use a nameserver at all so we need to enable it. The first 3 lines make that change to nsswitch.conf and save it in a new file, replace the old file, then set the right permissions.
Next we tell it what nameserver to use by adding a line to the resolv.conf file.
Download:file
All set! Time to reboot, just type reboot and hit enter.
The root account has full access to everything, so it's a very good idea to set a password. It's also a good idea to set up a normal user account. We'll do that next.
Here's the login screen, go ahead and log in as root with the password you just set. Once you push enter or click OK, it will ask which desktop environment you'd like. CDE is the default and a good choice, OpenWindows is the older environment.
Welcome to CDE!
A bunch of windows will open, you can close them all or take a look if you like. The Help Viewer will give you an introduction to the CDE desktop.
The panel on the bottom has everything you need, each icon will launch something or the arrow on top will expand a tray with more things to run. We want to create a new user, so open up Applications, go to System_Admin, then run Admintool.
Go to Edit, Add, and add a user for yourself. The defaults are fine for most of it. For the home directory path at the bottom you'll want to use /export/home/youruser. Click OK, then exit Admintool. Click exit down at the bottom of the panel and OK to log out. Now you can log in as your new user and the system will prompt you to set a password. The mouse needs to be in the password window to focus it. Once set you'll be able to login.
You'll get all the windows opening again, plus one that wants you to register. You can just click Never Register.
When you want to shut down, click Exit again, then go to Options and Command Line Login. Press enter to get a console login prompt, login as root, then type shutdown now. After that you can quit QEMU.
Mame 0.153 rom set. Next time you start you can leave out the CD part:
Download:file
That's it! Enjoy your Solaris system!
This guide was first published on Apr 26, 2019. It was lastupdated on Apr 26, 2019.
You can install Oracle Solaris 11 by using either an interactive or an automated installation. With an interactive installation, you have two options:
![11.4 11.4](https://i.kinja-img.com/gawker-media/image/upload/s--TNy_8kj6--/c_fit,fl_progressive,q_80,w_636/18ixlp6bq5d3jpng.png)
- The LiveCD for x86-based systems
- A text installer that can be used on either x86 or SPARC machines
These options are designed for installing the OS on a single system, whereas the automated installation option (commonly known as the Automated Installer, or AI) provides a “hands-free” network installation on a single system or for multiple-client systems.
System Requirements
Make sure the system has the below minimum requirements fulfilled, before beginning the installation of Solaris 11.
Hardware | Requirement |
---|---|
Disk space | Recommended minimum: 13 GB |
Memory | Recommended minimum: 1 GB |
Architectures | X86: 64-bit only, SPARC: Oracle Solaris M-series and T-series systems only |
Note: SPARC support is available on M-series and T-series systems only. Open Boot PROM (OBP) is required to be at 4.17 or higher. Using the latest firmware is recommended.
Installing Oracle Solaris 11 Using an Interactive Installer (Text Install on x86 VM)
For the purpose of this post, we will install Oracle Solaris 11 in an x86 VM machine. The process remains same while installing on SPARC based systems. To prepare for the installation, you first download and save the ISO image to your system. Select the ISO image as the boot media in Bios to begin the installation.
On the First screen, you are prompted to select the keyboard layout and language. Select appropriate keyboard layout and language here and proceed.
On next screen, you would see the text installer menu. The menu contains several options:
- Install Oracle Solaris: Allows you to install the operating system
- Install Additional Drivers: Allows you to install any device drivers that may be required to support the operating system
- Shell: Provides a shell; can be used to debug the installation
- Terminal type (currently sun-color): Provides a means of displaying the text installer correctly in case the default terminal type doesn’t work
- Reboot: Enables you to reboot the system after the installation has completed
To initiate the installation, select option 1. The default, as indicated by the number 1 in brackets, is to install Oracle Solaris, so all you have to do is press Enter to continue.
“Welcome to Oracle Solaris” Screen
This screen provides you with the temporary location of the installation log (/system/volatile/install_log) as well as instructions on how to navigate through the installer by using the function keys located at the bottom of the screen and the up and down arrow keys. To continue to the Disk screen, press the F2 function key.
Selecting a Disk
From the Welcome screen, you are taken to the Disks screen, where you are prompted to select where you want Oracle Solaris to be installed. To select the highlighted disk and continue to the next screen, press F2.
Selecting an Fdisk Partition
From the Disks screen, you are taken to the Fdisk Partitions (or the formatting disks) screen, where you can select to use a whole disk or to partition the disk. The “Use the whole disk” option is highlighted by default. Using the whole disk is highly recommended. To select this option and continue to the next screen, press F2.
Selecting a Network
ATX Motherboard For EPYC 7702 - Supermicro H11 Or H12?
The next screen is the Network screen, where you provide a computer name and select the wired Ethernet network connection configuration (Automatically, Manually, or None). The Automatically option automatically configures the network connection for you. The Manually option enables you to manually configure the network connection by responding to the prompts presented on the subsequent screens. The None option tells the system that you do not want to configure the network at this time.
To select one of these options, arrow down to Automatically, Manually, or None. When you have the desired option highlighted, press F2 to select it and continue. For this post example, you will manually configure the network.
Manually Configuring the Network
The next screen prompts you for the IP address for the network interface. In this example, the network interface is net0. When you have entered the required information for your network configuration, press F2 to continue.
DNS Name Service
The next screen provides you the opportunity to configure a DNS name service. To configure a DNS name service, select the first option. If you do not want to configure DNS, select the second option. In this example, you are not going to configure DNS.
Install Solaris 11.4 Vmware
Alternate Name Service
Sims 4 more food mod. The next screen enables you to select an alternate name service, such as LDAP or NIS. For this example, you are going to select None.
Selecting the Time Zone: Regions
The next screen that appears is “Time Zone: Regions“, where you select the region that contains the time zone that is appropriate to your installation. To make your selection, arrow down to the region and then press F2 to select it and continue. In this example, you are going to select Asia.
Setting the Time Zone: Locations
The next screen is the Time Zone: Locations screen, where you select the location that contains the time zone that is appropriate to your installation. Again, to make your selection, arrow down to the location of your choice and then press F2 to select it and continue. In this example installation, India is selected for the location.
Selecting the Time Zone
You next see the Time Zone screen. The selections presented on this screen are based on the region and location selections you made previously. To select the appropriate time zone, arrow down until your time zone is highlighted, and then press F2. To support the example installation, you select Asia/Kolkata.
Setting the Date and Time
The “Date and Time” screen appears next. Review the information that is presented and edit it as required. Note that the time is in the 24-hour format. After you have made the necessary edits, press F2 to continue.
Providing User Information
Next is the Users screen, where you enter your user information to include the system root password, your name, your username, and your user password. To continue, press F2.
Note: If you provide a username, that user is given the root role. If you do not provide a username, root is an account rather than a role, and is set to expire immediately.
Reviewing Installation Summary
Solaris 10 Install Package
After completing the configuration data, you see the Installation Summary screen. Review the information carefully to make sure it is accurate before you start the installation. To start the installation, press F2.
Note: You can go back and make changes if you need to by pressing F3.
Monitoring the Installation
The Installing Oracle Solaris screen enables you to monitor the progress of the installation. The installation takes about 10 to 15 minutes to complete.
Caution: After the installation starts, do not interrupt it. An incomplete installation can leave a disk in an indeterminate state
Verifying the Installation
When the installation concludes, the Installation Complete screen appears. This screen provides you with access to the installation log and, an opportunity to verify that no error messages were generated and that all the major facilities installed successfully.
You have the option of viewing the log at its /system/volatile/install_log location before rebooting by pressing F4. Alternatively, you can view the log at /var/sadm/system/logs/install_log after reboot.
Rebooting the System
After you have verified that the installation was successful, you can reboot the system by pressing F8. If you press F9 to quit, you are returned to the text installer menu, where you can select option 5 to reboot the system.